The most efficient way to water your yard is by using an automatic system. Hand watering can be problematic because it can lead to inconsistent watering, causing you to overwater, underwater, or forget to water altogether.
If you are ready to invest in a more efficient irrigation system, a Water Sense Smart hose timer is the way to go. It’s an inexpensive way to get your plants on an automatic irrigation system, allowing you to water your yard on a specific day of the week, time of the day, and for a set number of minutes. You can put it together yourself for under $100.
The hose timer can attach to high-quality irrigation Polypipe with drip emitters or connect to a professional landscape dripline. The irrigation dripline can stay in the ground year-round and is easily connected to an automatic in-ground irrigation system.
There are a variety of products you can use, including smart controllers, easy twist and turn controllers, battery controllers, multi-valve controllers, and more. We offer a rebate on ones that adjust to our weather and your plant’s watering needs.
Below is an example of a hose watering system using one of the smart irrigation controllers —in this case, a B-hyve hose faucet controller— included in our rebate program. All the pieces and parts needed for this system are listed below, but if you have any doubts, take this picture to your local irrigation supply store and they’ll help you get everything you need.
Plants thrive on a consistent watering routine that allows the soil to dry out slightly between waterings. Setting up an automatic hose bib system is easy, inexpensive, water smart and the best thing you can do to keep your plants healthy.
Learn more by checking out these other useful irrigation articles:
Author: Jill Brown, ASLA, is a Landscape Architect and owner of My Landscape Coach in Albuquerque, NM. Contributor: Greg at Sisco Irrigation, Albuquerque, NM. Have A question about the article? AskAnExpert@abcwua.org
The most important part of watering is figuring out how deep you need to water your plants. Once you figure that out, you can easily follow our chart that tells you how often to water.
Here are six simple steps to figuring out your watering depth:
Step 1: Water your landscape for the usual amount of time. If it’s the first time you’re watering, start with the number of minutes found in this Irrigation Advice Chart.
Step 2: Wait 24 hours after watering so the water has a chance to percolate into the soil.
Step 3: Grab a measuring tool, such as an 18” depth screwdriver, soil probe, barbecue skewer or 24” long piece of rebar, and probe your tool into an area you didn’t water to check the soil resistance. Next, go to an area that you watered the day before. Push the probe in until it stops. It should go in fairly easily. Don’t try to push it in further once it stops because you can accidentally break a pipe. Mark the spot it went into with your finger, tape or a permanent marker. Pull out the probe and measure the number of inches. Those inches represent your current watering depth. Using the Seasonal Watering Recommendations chart you can find out the depth you need for your type of plant.
Step 4: Adjust your watering time to correctly determine the watering depth. Did you only water 4” but needed a 12” watering depth? If so, then add more time to your watering schedule and perform the test again. Did you water 24” but only needed 18”? If so, then subtract time from your watering schedule. Water again and wait 24 hours to retest.
Step 5: Once you figure out the amount of time you need to water so the water penetrates to the correct soil depth, you are set.
Step 6: Set your controller for the correct amount of time. Use our handy Seasonal Watering Recommendations chart to see how often you’ll need to water your plants.
Don’t overthink it. Our local, desert-friendly plants (native and adaptive plants typically found in our local nurseries) usually thrive in our native soil.
Learn more by checking out these other useful drip irrigation articles:
Author: Jill Brown, ASLA, is a Landscape Architect and owner of My Landscape Coach in Albuquerque, NM. Have A question about the article? AskAnExpert@abcwua.org
Interesting sculptural form and unique bark patterning are a few of the many wonderful characteristics of this small ornamental tree. To maintain its best form, stay on top of stripping suckers and removing dead limbs. As a semi-evergreen, Mexican Elder will undergo brief periods of dropping leaves during extreme temperature conditions. The tree produces large clusters of creamy white flowers in the spring and late summer, with blooms sometimes lasting until December. The blue-black berries are relished by birds and can be used in elderberry recipes. A native to desert canyons across the Southwest, this semi-evergreen tree requires periodic watering but will not tolerate standing water.
The Canyon Grape serves double duty in the landscape as an ornamental and an edible for us and wildlife. As its name suggests, the Canyon Grape is a Southwest native typically found in wet conditions like shady canyons and along stream beds. Canyon Grape shines in the fall with its brilliant red foliage. Its fruit, although slightly smaller and a little seedier than a typical grape, can be processed into juice and preserves – if you can get to it before wildlife does!
With spring fast approaching and many homeowners heading out to local plant nurseries, we want to remind you how to plant for a healthy plant. Choosing the right plant for the right place is the most important consideration. Once you’ve selected the perfect desert-friendly plant, installing and irrigating it correctly are the next steps for success.
Step 1: Select the Right Plant for the Right Spot
Sun-loving plants should be planted in sunny spaces. Shade-loving plants should be placed under trees or next to walls where they’ll be protected from our intense New Mexico sun. Be sure the area is big enough to accommodate the plant when it reaches its full mature size, and remember to place plants with similar water needs together.
Step 2: Dig the Right Size Hole and Loosen the Soil
The right size hole for trees and shrubs is about three times wider and just a few inches deeper than the depth of the root ball. When transplanting annuals and perennials, look at the diameter of the plant’s container and make sure the soil around the hole is loosened up three to five times the size of the diameter of the container. If you dig a hole that’s just big enough for the plant’s root ball, you greatly limit how far the roots can easily grow and spread.
Step 3: Carefully Remove the Plant from its Container and Separate Matted Roots
Turn small plants upside down, supporting the soil with your hands. Tap the sides of the pot to loosen the soil, then lift the pot off the root ball. Pulling annuals and perennials out by their stems and leaves can cause damage.
Step 4:Place the Plant in the Hole and Backfill the Hole
Place the plant in the hole, making sure that the top of the root ball is close to level with the surrounding soil. Shovel the soil around the plant’s roots to fill in the hole and tamp gently to remove any large air pockets. If plants are going to be watered by hand or supplemented with rainwater, they should be planted in broad, shallow basins at least 4” deep and as wide as possible to hold water so it soaks deeply into the soil.
Step 5:Give the Plant a Good Soaking
Even water-thrifty xeric plants need a healthy drenching when transplanted. Make sure you soak the plant’s entire root zone. Keep in mind that your new plants will need more frequent watering during their first year than in subsequent years.
Step 6:Add Mulch!
A thick layer of shredded wood chip mulch, 2”- 4” deep depending on the size of the plant, will minimize evaporation, cool the soil and reduce weed growth.
Step 7: Use Efficient Irrigation
The majority of desert-friendly plants suitable for New Mexico landscapes can be most efficiently watered using drip irrigation. Drip emitters save water because they deliver a slow, steady dose of water directly to the plant’s root zone, significantly reducing evaporation.
Step 8:Maintain Your Desert-Friendly Xeriscape
Even a low-maintenance xeriscape requires some maintenance. Periodically check your irrigation system for leaks or clogs. Clean the filter and check drip emitters to prevent plugging. For trees and large shrubs, you may need to move emitters outward and add extra emitters as plants grow to make sure water soaks the entire root zone. Use our Water by the Seasons Watering Recommendations for all your seasonal water needs.
Check out our free .pdf, display it in a visible place and use it when you start your spring plantings.
Learn more by checking out these other useful drip irrigation articles:
